称重传感器

称重传感器
称重传感器

产品类别

联系方式

电话:0755-26738591

传真:0755-26998440

网址:http://www.octsources.com

邮箱:sales@octsources.com

地址:深圳市南山区南头街道虹步路39号马家龙14栋大习科创大厦

产品类别 > 放大器 > PKD-3放大器

PKD-3放大器

所属品牌:美国Transducer Techniques传感器 来源:深圳市现代豪方仪器仪表点击:623次发布时间:2021-05-20

PKD-3放大器

PKD-3放大器PDF资料:PKD-3放大器产品资料


品牌:美国Transducer Techniques

型号:PKD-3

类别:放大器




简要说明

PKD-3模块对数据电平的变化提供非常快速的响应,并捕获给定监视器窗口中出现的最高峰值。与微处理器控制的仪表以每秒三个采样转换数字读数,然后保存最高读数不同,PKD-3连续跟踪,并以模拟形式保持,直到复位。该模块具有极性选择和复位控制,可以从模块的前缘操作,也可以通过将TTL控制线切换到地面进行远程操作。

The PKD-3 Module provides very fast response to variations in data level and captures the highest peak that occurs in a given monitor window. Unlike microprocessor controlled meters that convert in digital readings at three samples per second and then save the highest reading, the PKD-3 tracks continually and holds in analog form until reset. The module has polarity select and reset control which can be operated from the front edge of the module or remotely by switching TTL control lines to ground.

 

PKD-3的典型应用是TMO-3和扭矩传感器与自动螺母转轮一起使用。当转轮失速时,可以节省峰值扭矩。如果系统评估需要回退转矩,则可以通过计算机将模块重置为零并改变极性。

A typical application for the PKD-3 is with a TMO-3 and a torque transducer used with an automatic nut runner. When the runner stalls, peak torque is saved. If backoff torque is needed for system evaluation, the module can be reset to zero and the polarity changed, both by computer.

 




规格:

输入范围Input Range

0-±5 VDC

输入范围Output Range

0-±5 VDC

响应时间Response Time

小于0.5ms

复位时间Reset Time

最小50ms

下垂时间Droop

小于2mV/分钟

控制力Power

从TI0-3000主板



浏览了该产品的用户还浏览:

称重传感器LBO-10K

SLB-250

LBC LOAD CELLS

DPM-3显示控制仪表,美国Transducer DPM-3

Transducer Techniques称重传感器

称重传感器客服
客服头部
称重传感器
称重传感器

扫一扫加微信公众号